H.S.D.P.A

High-Speed Downlink Packet Access (HSDPA) is a 3G (third generation) mobile telephony communications protocol in the High-Speed Packet Access (HSPA) family, which allows networks based on Universal Mobile Telecommunications System (UMTS) to have higher data transfer speeds and capacity. Current HSDPA deployments support down-link speeds of 1.8, 3.6, 7.2 and 14.4 Mbit/s. Further speed increases are planned for the near future. The networks are then to be upgraded to Evolved HSPA, which provides speeds of 42 Mbit/s downlink in its first release.TechnologyThe High-Speed Downlink Shared Channel (HS-DSCH) lacks two basic features of other W-CDMA channels — variable spreading factor and fast power control. Instead, it delivers the improved downlink performance using adaptive modulation and coding (AMC), fast packet scheduling at the base station, and fast retransmissions from the base station, known as hybrid automatic repeat-request (HARQ).Hybrid automatic repeat-request (HARQ)HARQ uses incremental redundancy, where user data is transmitted multiple times using different codings. When a corrupted packet is received, the user device saves it and later combines it with the retransmissions, to recover the error-free packet as efficiently as possible. Even if the retransmitted packets are corrupted, their combination can yield an error-free packet.Fast packet schedulingThe HS-DSCH downlink channel is shared between users using channel-dependent scheduling to make the best use of available radio conditions. Each user device periodically transmits an indication of the downlink signal quality, as often as 500 times per second. Using this information from all devices, the base station decides which users will be sent data on the next 2 ms frame and how much data should be sent for each user. More data can be sent to users which report high downlink signal quality.The amount of the channelisation code tree, and thus network bandwidth, allocated to HSDPA users is determined by the network. The allocation is "semi-static" in that it can be modified while the network is operating, but not on a frame-by-frame basis. This allocation represents a trade-off between bandwidth allocated for HSDPA users, versus that for voice and non-HSDPA data users. The allocation is in units of channelisation codes for Spreading Factor 16, of which 16 exist and up to 15 can be allocated to HSDPA.When the base station decides which users will receive data on the next frame, it also decides which channelisation codes will be used for each user. This information is sent to the user devices over one or more HSDPA "scheduling channels"; these channels are not part of the HSDPA allocation previously mentioned, but are allocated separately. Thus, for a given 2 ms frame, data may be sent to a number of users simultaneously, using different channelisation codes. The maximum number of users to receive data on a given 2 ms frame is determined by the number of allocated channelisation codes. By contrast, in CDMA2000 1xEV-DO, data is sent to only one user at a time.